Monday, June 4, 2018

McCall 6886 Easy T-Shirt Dress Hacked at Sew Camp Spring 2018




It's always a good day to talk about my sewing adventures.  Especially when the sun is shining and I have at least three pictures to share while I talk about it.  This dress was finished almost two months ago. 

Finally, I was able to take a few pictures of me wearing it.  I started and almost finished it at Sew Camp Spring 2018.  On our shopping day, I decided to purchase another copy of McCall 6886 from Fabric Mart.  It was only 25 cents.  I thought it would be a perfect project at the retreat.

This is a very basic t-shirt dress pattern that has three different necklines and three different lengths.  Actually, you can make the length whatever you want.  It comes in sizes 6-22, which is great.  I think this is the type of pattern all of us sewists should have in their collection.  There are so many possibilities.  And it can be used as a sloper to create and adjust other patterns for knit tops and dresses.



I purchased this really great knit with good color and recovery.  I didn't decide to use it for the dress until we returned from our shopping day.  My project started with, of course, cutting out the pattern; then making my usual fit adjustments.  Starting with size 14, I made a FBA, swayback, and prominent shoulder blade adjustments.

Before my adjustments, I decided on the length of the dress minus the flounce that I created.

FBA - I slashed and spread the front about 2" creating a bust dart slightly rotated for a more flattering look.  Because the spread was more than an inch, I used the Palmer-Pletsche "Y" FBA.  After all the slashing and spreading, I removed some of the excess width below the  bust area.  See picture below.




Swayback - To start, I made a tuck in the back pattern where my back curves to eliminate the pooling of fabric.  Next, I created an even more pronounced curved line along the lower back area where I made the tuck.  At the hem, I added the same amount that was tucked at the lower back.


Prominent Shoulder Blade -  Here again, I slashed and spread the desired amount and added a dart at the shoulder seam.  This adjustment gives me enough room across my upper back.

The flounce was so easy to create.  First, I determine the length.  Then added seam allowance to that number.  Next, I measured the width of the front and back of the dress.  Then, I cut one rectangle for the front and one for the back.  If the width of the front and back are the same, you only need one.  Next, I made slashes about every inch and spread the tissue for the desired  amount.


The flounces were sewn together.  Then attached to the bottom of the dress.  No hemming required.


More Changes:

I used a black lycra knit for the sleeve and neckband.  To finish the sleeve, I added a band in the dress fabric.  This I thought was a nice finishing touch.  Plus it breaks up the pattern of the dress.  The pattern neckband is always too long.  I generally shorten it by about 2" to eliminate gapping.




The style lines dress were the same as the drawing with the exception of the flounce.  For me, everything about the process was pretty easy.  Even the drafting of the flounce.  This is something a beginner can do with no problems.


What I like about it?

Everything: the pattern adjustment, drafting, sewing and wearing it. I really like the movement of the flounce around the bend of my legs.   So, I'm cutting another one cut this week.



Stay tuned!

Cennetta

15 comments:

  1. I spied this in your check out pile in Carolyn's post, maybe? I love the fabric, actually I think I liked everything I could see in your pile! This is a great dress for you. I like how you changed a basic pattern, which is probably a nice base for many other hacks. Very nice job.

    ReplyDelete
    Replies
    1. Thanks, Nancy. Yep it was in the pile of pretties. I still have about 2 yards left. Thanks again.

      Delete
  2. I have this pattern but have made it - you motivated me to try it . So if I u Dee stand correctly you doubled the flounc width & added seam allowance so no hem - sort of a self lining ?
    Great job , very stylish & flattering

    ReplyDelete
    Replies
    1. Thanks Maryellen, Yes the flounce is cut on the fold. One for the front and one for the back. Sorry I forgot to include that.

      Delete
  3. I really like your hack Cennetta. Very pretty.

    ReplyDelete
  4. This is really cute. And much prettier than the original pattern. Jean

    ReplyDelete
  5. Your dress is lovely! All of your changes led to an exceptional fit! And thank you for the neckband technique you use. I read about it on Made by Laquana, and have been using it ever since with great results. I am finding that I have a hollow chest too, but at least my neckbands are much better.

    ReplyDelete
    Replies
    1. Thanks, Vanessa. I'm glad the tip is helpful.

      Delete
  6. Love the fabric and the flounce. I was just wondering how to add a flounce to a skirt and here is my answer!

    ReplyDelete
  7. Beautifully done! This pattern is sew versatile! Love it!

    ReplyDelete
  8. This looks fabulous on you! Thank you for taking the time to discuss adjustments so many of us need and providing style advice as well much appreciated. Abbey sews

    ReplyDelete
  9. What a lovely dress! It's fun to have seen the beginnings of it at sew camp and then the final result. Thanks for all the helpful details.

    ReplyDelete

LinkWithin

Blog Widget by LinkWithin