Thursday, January 27, 2022

New Look NL6560 and Vogue V1294 - New Outfit Done

 



I'm so pleased with how both of these pieces turned out. It was a lot of fun making them. There are so many things I like about it.



Blouse

The fabric is lovely.  It is a polyester crepe from Minerva.   This soft, floaty fabric falls close to the body.  It sews and presses with no problems.  I love the bold, floral print.  There is an excellent balance between the ivory and black. 

The flounce is very feminine and pretty.  Most of the time, I shy away from neckline flounces, but this one doesn't add to my top heaviness.  

The sleeves are pretty and simple.  The bell falls perfectly above my hand held together by a piece of elastic.  Super simple to construct.  




I also like that the tie was separate from the top.  It closes with an inside twill tape tie and a buttonhole closure on the outside just above the waist.  I used a piece of interfacing to reinforce where I sewed on the button.





My adjustments to the front facing resulted in a wider lower facing.  I wish I had made the upper portion wider too, It kept flipping to the right side of the blouse.  So, after I under-stitched around the neckline, I stitched again to secure the facing to the blouse in hopes of reducing the flip over affect.

This was the second time I used this pattern.  Previously, I made view C and gifted that top to my sister.  So, I was already familiar with most of the construction steps.  In general, they are typical.  Nothing difficult or unique about them compared to other styles with similar instructions.



Pants

The pants are of a viscose suiting, also from Minerva Fabrics.  It has a crisp hand and a stiff drape.  Easy to sew and press.  I love a nice striped fabric.  The pinstripe is subtle, pairing the two fabrics there is no competition between the prints.  They complement each other.

I'll use this pattern again.  They are well drafted, and I love a curved waistband.  And I will definitely add welt pockets again.  They are a great detail.

My related posts are here: blouse and pants 

Happy Sewing!

C  



Tuesday, January 25, 2022

Notes On A Pattern - New Look NL6560

Today I wanted to share my pattern fit adjustments of a recent project for Minerva Fabrics.  I actually made these adjustments a few years ago and made a top using New Look 6560, view D.  That top was gifted to my sister, and I didn't think about blogging the details about the project.

This month Minerva is hosting a challenge using New Look patterns.  I decided to use this one because it was ready for use.   My goal is to share the pattern adjustments in case another sewist is planning to try the pattern that may need to make similar fit adjustments. 


FBA


There is a lot going on with these two pattern pieces.  First, I made the FBA on the front rotating the side dart to the gathers above the bust.  Zoom in to see details.  Along the neckline about where the two front pieces intersect, I made a 1/2 inch tuck to reduce gapping at above the bust and in the neckline.  

For the front facing, I added length based on the FBA on the front blouse.  I also made the same tuck to make sure the pieces matched.  As you can see, the lower part of the facing is wider than the upper part.  That's ok.  But you can widen the rest of it as well making sure you do the same to the back facing.



Next, I added the same amount of length to the flounce to make sure it matched up with the front and the facing.


Prominent Shoulder Blades



I simply sliced the pattern from the shoulder seam to the hem to add the desired width.  To true up the shoulder seam, I added a small dart.  The vertical back/waist darts is slightly wider too.  But these can be adjusted as needed.  

I didn't do my usual sway back adjustment because I will wear this top with a belt. 

Note:  This top is really short.  I added about two inches to the bottom of the front, back and front facing.  Check the length to make sure it long enough for you. 

So that's all for the adjustment on this pattern.

Stay tuned!

C








Monday, January 24, 2022

Notes On A Pattern - Adding Welt Patterns to Vogue V1294




Goodness, I haven't done a Notes on a Pattern in a while.  Being on Instagram more these days, make it so easy not to come to blogland to surf or post.  

So many of my recent posts have been made well after I've posted on Instagram or to other platforms.  I want to get back to reading blogs and posting on a more consisted basis.  Yeah, I know, I've said that before. 

Anyway, this note is about adding welt pockets to a pair of pants.  One of my goals is to continue to add more welt pockets to my garments.  For these pants, I simply used a welt pocket pattern from another pattern.  Sorry, I can't remember which one.  I made another copy of the pieces and added them to the envelope of Vogue V1294.  I already know I will make these pants again.


I really like the draft of these pants.  There is a "real" fly, and the curved waistband is the best.  Also, the crotch isn't super long.  I didn't have to shorten it.  The width of the pant leg is great too.

Before I added the pockets to the pants, I did a test pocket just to make sure. ;-)  It turned out perfect.  Next, time to add the pockets to the back of my pants.  This was the next step in the construction after I made the darts.

Placement is really important.  From what I've read, the tip of the dart shouldn't extend pass the bottom of the welt. 

But I notice that my pockets are a little low on the back side.  So, next time, I think I'll add an inch to the top of the waist.  It won't be too much above the waistline as these sit kind of low to begin with.  And with that small change, I can raise the pocket an inch.

More later on the making of my pants.  Stay tuned.

Parting Shot:  View of my pockets with me wearing the pants.  I'll post a full photo after I post to Minerva's website as this is a Minerva sponsored project.







Sunday, January 23, 2022

January 2022 - The Month of Knit Top M8238 Burda Style 6990 M7836


My last post was a pattern review on McCall M7836, View C.  I didn't have any photos of me wearing the top at the time of the view.  Since then, I had an opportunity to take a few photos along with photos of two other knit tops that I made the same week.

Before I talk about the other knit tops I made, here are a few pictures of me wearing M7836, View C.




I'm wearing a pair of McCall 8244 leggings that I made sometime in October, I think.  I didn't bother to review them.  They were super easy. I was just waiting to show them with a new top or tunic.

You know I really try to maximize my use of patterns that I like.  So, my little collection of TNT patterns is growing.  Lol. I made another version of M8238-B and another of Burda Style 6990-D.

M8238-B

I just made a little minor change of making it a little smaller for a closer fit.







Burda Style 6990-D

Minor change to this one too.  I didn't have enough yardage to make the sleeve one piece.  So, I added a cuff like to make my desired length. 







Happy Sewing!

C



Wednesday, January 12, 2022

First Garment of the Year! McCall M7836






Today I'm sharing my first sewing project for 2022.  This is the third top that I've made from McCall 7836.  The second one hasn't been reviewed yet.  I gave it to my sister early last year and almost forgot I made it.  



My initial plan was to make all the views.  But now I don't think I'll make view D.  My favorites are this view and view A.  I'll probably make them again.

This top was made to wear with a pair of leggings that I made a few months ago (I'll review them later this month.).   

I used size 16 with only a design modification.  The sizing was good for me without making a FBA.

For the most part, my top looks like the top the model is wearing on the envelope.  The top was easy to sew and it went together with no problems.





There are a few little things to look out for.  The notches on the two front and two back patterns do not line up.  See photos below.  No biggie, just line up the top and the bottom edges and sew them together.  It comes out even.  There was nothing confusing in the instructions other than that.




My likes:

  • Drop shoulders
  • Mock turtleneck
  • Cold shoulder and the drape of the sleeve
Dislikes:
  • Once I finished the top, I didn't like the width of the shoulder opening. It was too wide for me.  So I decided to make a braided strap to kind of control how wide the opening falls and to make it easier to wear with a traditional bra.  I think the strap adds a little more style to the top too.



The fabric I used is a stretch polyester velvet that I purchased at my local JoAnn's Fabric.  It washes and dries beautifully.  And it was also easy to sew.

I will probably make this again.  It's stylish and is a great top to wear with leggings or close-fitting pants.


I do recommend it to others.  This is not a new pattern.  And I think many sewists in the online sewing community have made it.  For sure I will make this one again.

Happy Sewing!
C

















LinkWithin

Blog Widget by LinkWithin