Hi everyone,
Today, I'm posting my part III
of my “Copy That” inspired by Coachtopia Cloud Tote. First, let me say it
has been so much fun making these tote bags. There is so much you can do
with a simple pattern. You can elevate the look using fabric or by adding
design elements to make it stand out. And then sometimes it can be about making
it more functional for your personal use.
Warning - This post is
long. I want to provide details on how I made the second and third tote.
So here goes.
Tote #2 - Faux Fur with
non-stretch knit "looking" wrong side. The lining is a
polyester taffeta that I purchased at Joann's Fabrics. It is tightly
woven and feels like a waterproof textile. Very sturdy and perfect for
the lining.
I purchased the faux fur from
the Textile Warehouse in Chicago (West 21st near Damen Avenue). It is a
fun, funky animal print in hot pink and black. Upon examining the back of
the fabric, I thought it might need an additional layer of support. So I
used a double sided fusible web to adhere a cotton broadcloth to the wrong side
of it. This process added durability to the tote.
After I cut out the tote, I
fused the web to the wrong side of the fabric following the manufacturer's
instructions. Below are a few photos that I managed to take during the
process.
I wanted my tote bag to have some pockets. Using the lining fabric, I cut two pieces of fabric, the same size, to make a doubled layered pocket strip. After sewing the pocket strip to the bag lining, I then sewed four more vertical lines to make two large pockets and two small ones to hold pencils and pens. For the smaller pockets, I also sewed a horizontal line across them to prevent the pencils/pens from falling too far into the slot.
(PLEASE NOTE: POCKET CONSTRUCTION PHOTOS ARE OF THE THIRD TOTE. DIFFERENT COLOR. I FORGOT TO TAKE PICTURES OF THE PROCESS USING THE BLACK LINING. LAST PHOTO SHOWS BLACK LINING POCKET FOR THE FAUX FUR TOTE.)
Once the broadcloth was secured
to the back and the pockets/label were sewn on, I was ready to put the tote
together.
First, I sewed the body of the bag and lining together using a 3/8" seam allowance. At the top of each side of the tote bag and lining, start sewing 3/8" from the top. At the bottom curve of both, I sewed a second row of stitches to help prevent break through.
I also sewed the straps together.
Next, I pressed both and turned the bag to the right side leaving the lining
with the wrong side on the outside. Then I slipped the lining inside the
bag matching the straps and the front and back curve of the upper body.
Next, I pinned the two together; then sewed along the straps and upper part of
the bag together.
The last step made it easy to
add the bias tape to all of the raw edges of the tote bag. To make my bias tape, follow the instructions in this link. I cut my tape about
1.5" wide. For the bias tape, I used a remnant of black silky polyester
lining. It was easier to work with than the taffeta. The taffeta
has almost no stretch or give on the bias. So once I had
made the strip of bias tape, I folded it in half and pressed it. Next, I
sewed it to the wrong side of the bag along all raw edges keeping them even and
slightly stretching the bias tape along the curve areas of the bag. At
each end I left about 1" (loose bias tape) as the ends needed to be sewn
together to complete the circle. There will be three separate sections
along the opening and the straps of the bag that require this finishing.
Completing the circle of the bias tape edge was a little tricky; I ended up
slightly overlapping them tucking the raw edge of the outer tape under to
finish with a folded edge (if that makes sense). Before rolling the bias
tape folded edge to cover the raw edge, I trimmed away about half of the seam
allowance to help make it easier. The folded edge of the bias tape should at
least cover the seam line.
Once that is done, Press using
a pressing cloth. Make sure not to flatten the pile of the faux
fur. That's it for this version.
Tote #3. I used a slightly different method of
constructing this tote. First, the
fabric I used is a quilted nylon with a fleece like backing also from the
Textile Warehouse. I added a broadcloth
to the wrong side for this version. Same
process as the faux fur version. The
lining was also a taffeta that I purchased at Joann’s.
I used the same construction
process to make the pockets and to sew the lining and bag together. But instead of sewing the wrong sides together
to add a bias tape. I followed the instructions
given by Made Everyday.com Here is the link.
It was pretty easy. I finished it
with top stitching along all edges.
I hope this was helpful.
Happy Sewing!
C
